STOUT Radiator Angle H-Block 3/4", Nickel, Nickel-Plated Brass, Art. SVH-0004-000020

STOUT angle H-block 3/4″ (Art. SVH-0004-000020) is a shut-off and connection unit for radiators with bottom connection stubs on a horizontal two-pipe water heating system. Its angled body lets you connect the radiator to pipes concealed in the wall, and its built-in ball valves let you isolate the radiator without draining the system.

The H-shaped body and the union nuts are nickel-plated brass CW 617N, and EPDM O-rings on the upper stubs seal the joint with the radiator. On the radiator side, the unit has G 3/4 female threads on union nuts, 50 mm apart; on the pipe side, it has G 3/4 male threads for eurocone compression fittings. STOUT rates it at PN 10, with a test pressure of 15 bar and a heat-carrier temperature of up to 120 °C.

Plastic, multilayer and copper pipes connect to it through eurocone compression fittings, which are not part of the set and are ordered separately. Tighten the union nuts to no more than 35 N·m, and never use lever pipe wrenches. Other models are in our range of radiator valves and H-blocks.