STOUT Underfloor Heating Manifold G3/4, 5 Outlets, with Flow Meters, Stainless Steel, Art. SMS-0927-000005

STOUT underfloor heating manifold with flow meters (Art. SMS-0927-000005) shares the heat carrier between five loops, each of which connects to its own G 3/4 eurocone outlet. Every loop is joined to the block independently of the others, so you can balance the loops hydraulically, shut any one of them off on its own, and vent or drain the system right at the manifold.

Both the supply and the return bar are made of stainless steel. The supply bar carries balancing flow meters, which are set to the design flow rates directly on the running system, while the return bar has thermostatic valves with regulating caps and presettable flow. The kit also contains two bracket sets, the eurocone nipples, two air vent valves and two drain valves, but no ball valves or thermometers.

STOUT designs these blocks for heating systems piped in polymer and multilayer pipe. Each pipe joins its outlet through a eurocone compression fitting with a 3/4″ thread, which is not included and is chosen to match the size of your pipe. The bars connect to the pipework with G 1″ threads, and the block is rated for a maximum operating pressure of 6 bar and a maximum heat-carrier temperature of 70 °C. For other configurations, see our full selection of heating and underfloor manifolds.