STOUT Indirect Hot Water Cylinder 150 l, Enamelled Steel, Electric Element, Art. SWH-1110-050150

STOUT combined hot water cylinder 150 l (Art. SWH-1110-050150) is a floor-standing storage cylinder that heats domestic hot water in two ways: through a coil connected to the heating boiler, and with a built-in 2 kW electric element. It belongs to STOUT’s SWH-1110 series of floor-standing cylinders.

The steel tank is lined inside with a special anti-corrosion glass enamel, and a magnesium anode adds protection. Polyurethane foam insulation fills the space between the inner tank and the outer jacket, and the jacket itself is sheet steel finished in white powder coating.

Its maximum working pressure is 6 bar. Compare the 150 l cylinder with other cylinders and water heaters in our range within the same category, while connection parts can be looked for among our selection of STOUT heating and plumbing products. Heating water entering the coil must not be hotter than 95 °C, and STOUT does not allow the coil to be connected to an open heating system.

Plan the space before installation: STOUT asks for at least 300 mm of free space above the cylinder for cleaning and for changing the magnesium anode, and the floor must be able to carry the weight of the filled cylinder. The maker also requires a 6 bar safety valve on the cold-water inlet. Whether 150 l is enough for your household depends on how much hot water you draw at the same time and how much heat the boiler can deliver to the coil, so choose the cylinder size and its connection layout with an installer.